Alu body post stop nut for #301351-O made from Swiss 7075 T6 aluminum. Spare part for #301351-O Alu Adjustable Body Post Stop (2). 

Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369. 

Alu shims 3x6mm size, 0.5mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 0.5mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Black color. Set of 10. 

Alu shims 3x6mm size, 3mm thick. Orange color. Set of 10. 

Alu shims 3x6mm size, 5mm thick. Black color, set of 10. 

Polished chrome pin for CVD drive shaft, 2 x 10mm. Specially hand-ground for maximum precision. 

High-performance 20 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 21 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 22 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 23 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 24 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 25 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 26 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 27 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 28 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 29 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 30 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 31 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 32 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 33 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 34 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY. 

High-performance 14T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 15T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 16T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 17T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
 

High-performance 20T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 19T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 20T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 21T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 22T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 23T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 24T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 25T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 26T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 27T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 28T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 29T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 30T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 31T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 32T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 33T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

High-performance 34T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.  

XRAY precision-molded offset spur gear 72T 48P, strategically lightened to reduce rotating mass. 

XRAY precision-molded offset spur gear 76T 48P, strategically lightened to reduce rotating mass. 

XRAY precision-molded offset spur gear 79T 48P, strategically lightened to reduce rotating mass. 

XRAY precision molded spur gear 84 tooth, 48 pitch. 

XRAY precision molded offset spur gear 90 tooth, 64 pitch 

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 

XRAY precision molded offset spur gear 96 tooth, 64 pitch. 

Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 

XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. 

XRAY precision molded offset spur gear 100 tooth, 64 pitch. 

XRAY precision molded offset spur gear 110 tooth, 64 pitch. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear. 

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  

These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine for ultra-precise tolerances and unparalleled concentricity.  

Complete battery mounting system for 4-cell inline battery pack. Includes graphite battery holding plate, molded holder posts, and fasteners. 

Molded antenna mount.  

Antenna tube to fit antenna mount. Set of two. 

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. 

Aluminum shock collars for use on XRAY shock absorbers to increase durability.  

Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color. 

Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment. 

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment. 

One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks. 

A set of 4 screws and 4 cone washers for wheel mounting. 

Flat washer, 3.2mm I.D. Set of 10 pieces. 

Hex screw M3x8. Set of 10 pieces. 

Hex screw with flat head M3x6. Set of 10 pieces. 

Hex screw with flat head M3x10. Set of 10 pieces. 

Body clips. Set of 8 pieces. 

Rubber tires specially developed for low-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.  

Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2. 

Clear Lexan® body - 1:12th scale version of the popular touring car body fits on 1:12th scale electric touring cars such as the XRAY T1 Mini.  

A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification. 

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 

XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs. 

M3x8 button-head machine screw, hex drive. Set of 10 pieces. 

M3x6 flat-head machine screw, silver colour, hex drive. Set of 10 pieces. 

M3x10 flat-head machine screw, silver colour, hex drive. Set of 10 pieces. 

Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities. 

High-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4.  

Flat washer, 3.2mm ID. Set of 10 pieces. 

Cone washer ID x OD x thickness = 4.2mm x 10mm x 0.4mm. Set of 10 pieces.  

Cone washer ID x OD x thickness = 4.2mm x 12mm x 0.4mm. Set of 10 pieces.